Operation T12

ArtNr.: 103390

    • 3 Wege Tri-1mp Line Array System
    • Dual 12" Woofer mit effizientem Hitzemanagement
    • Mittelton Phase Plug für vortgeschrittenes Ankoppeln an HF und LF
    • Hohe SPL
    • Extrem klar, extrem druckvoll, extrem gut!
Applications

Live Sound Reinforcement, Theatre, Arena
 
Features

The high quality active version of the popular line array OP3228L is officially launched. The premium performance is driven digitally by an advantage class D switching power amplifier module with built-in DSP control. More info about this amplifier module could be discovered in next page. The active version remains almost same high quality performance as its passive version: A double 8” line array speaker with higher sound pressure, wider frequency response and much better sonic performance. Based on classic theories about line array and cutting-edge engineering design, the performance of this new active OP3228A is optimized to maintain steady coverage within the whole working frequency response scope. Meanwhile, the coherence of line array technologies is reached and the flexibility is increased, altogether makes it very convenient for
reassembling in tour events. One of the characteristics of the new model is to combine two different low frequency units together.
 
In lower frequency range, the two low-frequency drivers higher frequency range, polarity and frequency response are both acquired since there is only one low frequency driver working. As the supplement in application of OP3228A line array, OPL118A, an active single 18 inches utra-low frequency speaker is developed according to the frequency response and the outer specialty of OP3228A. New design on hanging system ensure the safety and at the same time enable the speakers could be assembled to the line array seamlessly which makes it very convenient for reassembling in tour events. The well-chosen neodymium driver is relatively light, could provide not only higher power output, but also a higher timbre.

technical data

sensitivity

  • sensitivity LF (1w/1m) 100 dB
  • sensitivity MF (1w/1m) 105 dB
  • sensitivity HF (1w/1m) 110 dB
  • SPL LF / program 135 dB / 129 dB
  • SPL MF / program 138 dB / 132 dB
  • SPL HF / program 139 dB / 133 dB

Frequency

  • frequency response 85 Hz - 20 kHz (-10 dB)
  • usable bandwidth 96 Hz - 18 kHz (±3 dB)
  • crossover Hi-Mid: 1KHz Mid-Low: 240Hz

directivity

  • Nominal Directivity Horizontal 90°
  • Nominal Directivity Vertical defined by the array, single element 10°
  • vertical steps
  • vertical range 0-10°

Power

  • Power LF (AES) 800W ( 2 x 400W)
  • Power MF (AES) 480W (4 x 120W)
  • Power HF (AES) 220W (2 x 110W)
  • Nominal Impedance LF 8 Ω
  • Nominal Impedance MF 8 Ω
  • Nominal Impedance HF 8 Ω

Components

  • Transducer LF 2 x 12" with Ferrite magnets
  • Voice Coil LF 75 mm
  • Transducer MF 4 x 6,5" with Neodymium magnets
  • Voice Coil MF 45 mm
  • Transducer HF 2 x 3" (1,4" Horn) with neodymium magnets
  • Voice Coil HF 75 mm
  • connector 2x Neutrik NL8MP
  • pin assignment HF: 1+1- MF: 2+2- LF: 3+3-

Hardware

  • Dimensions (L/W/H) 1024×503×367 mm
  • Weight 68,00 kg

Shipping data

  • Dimensions (L/B/H) 1085 x 505 x 375 mm
  • Weight 65,00 kg
  • EAN 4042659022145